Cold Room Evaporators
TEC C Series Commercial Type Air Coolers
Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.
General Product Properties
- Coils are made with copper tubes and aluminium fins.
- End-plates are made of aluminium.
- Casing is coated with electro-staticly powder painted.
- E1 and E2 type of heaters are considered
Options
- Inner Grooved copper tubes are available
- Pre-coated aluminium fins and copper fins are avaliable
- Casing can be made of stainless steel sheet metal
- Additional heaters
- Choice of EBM, Ziehl Abegg or equivalent fan
- Whole body epoxy coating with dipping
TEC S Series Angled Type Air Coolers
Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.
General Product Properties
- Coils are made with copper tubes and aluminium fins.
- End-plates are made of aluminium.
- Casing is coated with electro-staticly powder painted.
- E1 and E2 type of heaters are considered
Options
- Inner Grooved copper tubes are available
- Pre-coated aluminium fins and copper fins are avaliable
- Casing can be made of stainless steel sheet metal
- Additional heaters
- Choice of EBM, Ziehl Abegg or equivalent fan
- Whole body epoxy coating with dipping
TEC D Series Double Flow Air Coolers
Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.
General Product Properties
- Coils are made with copper tubes and aluminium fins.
- End-plates are made of aluminium.
- Casing is coated with electro-staticly powder painted.
- E1 and E2 type of heaters are considered
Options
- Inner Grooved copper tubes are available
- Pre-coated aluminium fins and copper fins are avaliable
- Casing can be made of stainless steel sheet metal
- Additional heaters
- Choice of EBM, Ziehl Abegg or equivalent fan
- Whole body epoxy coating with dipping
TEI C Series Industrial Type Air Coolers
Capacities for our Industrial Type Standart Air Coolers range between6 ,5 KW to 180 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10-12 (mm) fin distances and are equipped with electro-staticly powder coated casings.
General Product Properties
- Coils are made with copper tubes and aluminium fins.
- End-plates are made of aluminium.
- Casing is coated with electro-staticly powder painted.
- E1 and E2 type of heaters are considered
Options
- Inner Grooved copper tubes are available
- Pre-coated aluminium fins and copper fins are avaliable
- Casing can be made of stainless steel sheet metal
- Additional heaters
- Choice of EBM, Ziehl Abegg or equivalent fan
- Whole body epoxy coating with dipping
TEF Series Blast Freezers
Our Blast Freezers are designed as 3 different types with 1/2” and 5/8” type copper tubes and are given with catalogue values of 5,75 KW to 75 KW, main design criteria is the maximum thermal efficiency. Blast Freezers are used to cool down or freeze any type of meat, dairy products and bakery products at very short time intervals. Such short and time and effective of freezing is used to ensure the freshness and life span of products.
General Product Properties :
- Coils are made with copper tubes and aluminum fins.
- End-plates are made of aluminum.
- Casing is coated with electro-staticly powder painted casings.
- Coil, Drain Tray, Fan and Drain Line defrost system
Options :
- Inner Grooved tubes are available
- Pre-coated aluminum fins and copper fins are avaliable
- Casing can be made of stainless steel sheet metal
- Additional heaters
- Choice of EBM, Ziehl Abegg or equivalent fan
- Whole body epoxy coating with dipping
App for maintenance people
Aircraft air conditioning
- The air conditioner is manufactured as a homogeneous unit in the USA and is used as a portable air conditioner in light aircraft, yachts and as a quality solution for the air conditioning system that operates on a direct voltage of 24V and V12.
Manufacturer Website: www.arcticaircooler.com
- Weight and dimensions:
42 Liber 13 “W x 19” H x 13 “D so that the ground pressure meets the limits of aircraft production.
-
- Voltage: V12 / V24
- Output: CFM200 – spins about 4 times all the air in the cabin every 60 seconds for a 4-seater aircraft.
- Cooling output: 5000 – 7000 BTU
- Current consumption: 19 – 27 amps
The air conditioning unit is designed for work with varying output depending on the power consumption that the alternator will provide
If the aircraft provides a current of about 19 amps, the unit will provide a minimum output of about 5000 BTU
If the aircraft provides a current of about 27 amps, the unit will provide an output of about 7000BTU
The air conditioner starts working at low output to prevent a relatively high starting current.
-
- General weight meets the limits of the aircraft trunk and will be taken into account in weighing the aircraft and calculating the torque C.G.
-
Rom will fix the air conditioner to the floor of the trunk to the original mooring points of the aircraft, in addition to drainage to condensed water and a side opening for condensing air emission by flexible air roll provided by the manufacturer
The air conditioning outside the plane to the atmosphere.
Fasti Euro
Rafkol Group Ltd. offers advanced cooling and air conditioning solutions, and leads the field of cooling for the plastics industries. Rafkol Ltd. is the exclusive service provider of FASTI and Euro Chiller, Toop temp in Israel, upgrading and streamlining the service system for the plastics industry. Rafkol technicians undergo advanced training in centers abroad at the manufacturer, and maintain continuous contact with them.
Effective compression of frozen air at a temperature of 34 ° C into a plastic container,
Quality firming of the container and improvement in production capacity.
CAC units are units equipped with air lock regulators, special inflating accessories –
All of these allow for high compression of air
Dehumidification units in MSP molds – creating a dry environment around the mold and its surroundings,
Closed by 3-degree airflows, preventing sweating
From the cooling water all year round.
The control of a constant air temperature without changes due to a changing ambient temperature gives an increase of about 30% in the speed and quality of production.
A productive unit 24 hours a year all year round as well as a low-temperature cooling option increases the brightness of the material.
In dual units (ABF Twin Version), the machine is capable of cooling the ring as well as the IBC at different temperatures and in separate control from each other.
The company’s technicians undergo advanced training abroad at the manufacturers and are in continuous contact with them.
